Agent for Windows Installation

Requires: Microsoft Windows 2000 or higher, 32-bit or 64-bit.
This procedure installs and configures the CubixVision Agent.
  1. Download the CubixVision Agent installer cvagent.exe from the link at the end of this page.
  2. Run the CubixVision Agent installer. After a successful installation, press the "Finish" button. By default, after installation of the agent a utility program is launched in order to configure the Agent.
  3. Under "CubixVision Console Network Address", enter the network host name or IP address of a machine running GPUManager console.
  4. Under "Blade Serial Number", you may optionally enter a number of up to 8 digits that can be used to identify the host CPU.
    (Blade Serial Number is used mainly to identify Cubix Blades in the CubixVision management console).
    The option "Hard Reset Blade when Agent stops" has no effect unless Cubix Management Controllers are used.
  5. Press the "Save" button to save the network host name/IP address.
  6. Press the "Start" button to start CubixVision Agent.

    CubixVision Agent Configuration

  7. If the Agent is successful in contacting GPUManager console, the status area at the bottom of the window will pulse green. The configuration window can now be closed.
After successful installation of CubixVision Agent, the Agent service is started in the background. The Agent status can be viewed at any time by starting the Agent configuration utility (Start -> All Programs -> CubixVision Agent -> CubixVision Agent). It is not necessary to run the Agent configuration utility continuously - the Agent service will continue to run in the background after the application window is closed.